Sprawdzenie dysku – Nowy KS24G

Witam, właśnie zakupiłem nowy serwer kimsufi 24G i został zainstalowany.

Prosił bym o sprawdzenie dysku czy jest nowy i czy nie ma jakiś błędów, czy jest do wymiany lub też może dali jakiś używany?

Log z trybu rescue:

Cytat:

smartctl 5.40 2010-02-03 r3060 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model: ST32000641AS
Serial Number: 9WM4L248
Firmware Version: CC13
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri Jun 3 11:35:42 2011 CEST
SMART support is: Available – device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always – 38754929
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always – 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always – 11
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always – 0
7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always – 109683
9 Power_On_Hours 0x0032 100 100 000 Old_age Always – 28
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always – 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always – 11
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always – 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always – 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always – 0
188 Command_Timeout 0x0032 100 098 000 Old_age Always – 4
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always – 0
190 Airflow_Temperature_Cel 0x0022 043 041 045 Old_age Always FAILING_NOW 57 (0 252 57 31)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always – 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always – 10
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always – 11
194 Temperature_Celsius 0x0022 057 059 000 Old_age Always – 57 (0 21 0 0)
195 Hardware_ECC_Recovered 0x001a 033 021 000 Old_age Always – 38754929
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always – 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline – 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always – 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline – 146844931850292
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline – 2012593935
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline – 19741219

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 25 –
# 2 Short offline Completed without error 00% 22 –
# 3 Short offline Completed without error 00% 22 –
# 4 Short offline Completed without error 00% 7 –

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.