Problem ale z czym?

Dziś jeden serwer a dokładniej EG best zaczął mi sypać błędami i nie wiem z czym jest problem.

Kod:

ata2.00: exception Emask 0x0 SAct 0x7ffc SErr 0x0 action 0x6 frozen
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/00:10:81:b7:48/04:00:d8:00:00/40 tag 2 ncq 524288 in
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/80:18:81:bb:48/00:00:d8:00:00/40 tag 3 ncq 65536 in
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/80:20:01:bc:48/03:00:d8:00:00/40 tag 4 ncq 458752 in
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/00:28:e1:1b:83/01:00:d7:00:00/40 tag 5 ncq 131072 in
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/00:30:e1:1c:83/01:00:d7:00:00/40 tag 6 ncq 131072 in
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/00:38:81:bf:48/04:00:d8:00:00/40 tag 7 ncq 524288 in
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/00:40:81:c3:48/04:00:d8:00:00/40 tag 8 ncq 524288 in
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/00:48:81:c7:48/04:00:d8:00:00/40 tag 9 ncq 524288 in
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/80:50:81:cb:48/00:00:d8:00:00/40 tag 10 ncq 65536 in
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/00:58:c9:96:cf/02:00:b4:00:00/40 tag 11 ncq 262144 in
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/40:60:21:e0:a7/00:00:1e:00:00/40 tag 12 ncq 32768 in
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/80:68:01:cc:48/03:00:d8:00:00/40 tag 13 ncq 458752 in
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/40:70:21:c4:3a/00:00:02:00:00/40 tag 14 ncq 32768 out
        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2: EH complete


Dyski to WDC WD2002FAEX-007BA0, nie mam żadnych błędów etc. wyniki ze "smarta" wyglądają identycznie

Cytat:

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always – 0
3 Spin_Up_Time 0x0027 253 253 021 Pre-fail Always – 7175
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always – 25
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always – 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always – 0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always – 2109
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always – 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always – 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always – 23
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always – 22
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always – 2
194 Temperature_Celsius 0x0022 116 094 000 Old_age Always – 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always – 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always – 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline – 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always – 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline – 0


Ma ktoś pomysł co to może być ?